Zephyr ZSIE30ASES Bedienungsanleitung PDF herunterladen (Seite 15)

SURFACE MAINTENANCE:

Clean the hood surface periodically with hot soapy water and clean cotton cloth. Do not use corrosive or

abrasive detergent, or steel wool/scouring pads which will scratch and damage surface.

For heavier soil use liquid degreaser.

After cleaning it is recommended that you use non-abrasive stainless steel polish/cleaners, to polish and

buff out the stainless luster and grain. Always scrub lightly, with clean cotton cloth, and with the grain.

Do not use any product containing chlorine bleach. Do not use “orange” cleaners.

Bafe Filters

The bafe lters installed by the factory are intended to lter out residue and grease from cooking. They

need not be replaced on a regular basis but are required to be kept clean.

Remove and clean by hand or in dishwasher on low heat. Spray degreasing detergent and leave to soak if

heavily soiled.

Dry lters and re-install before using hood.

Removing Bafe Filters

1. Push in on spring loaded handle

2. Pull down on lter hande to remove lter

Should lters wear out due to age and prolonged use,

replace with following part number:

Hood Model: Part No. Qty. to Order.

ZSI 50200050 2

Maintenance – Cleaning and Filter Care

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21 22

Keine Kommentare

Zephyr ZSIE30ASES Bedienungsanleitung Seite 15