Zephyr ION Spezifikationen PDF herunterladen (Seite 28)

First steps

1. Check first that your Ion is plugged in and turned on.

2. There will be a red screen and red light when your Ion is plugged in and off.

3. If your Ion is plugged in and the lights are not on, make sure the outlet is

working by testing with another appliance e.g. cell phone charger.

Ion will not heat up

• Set your Ion to lowest temperature, which is 100°F, then switch from

Fahrenheit to Celsius then switch back to Fahrenheit. This process will reset

the electronics for the heating element.

• To switch between F and C press both temperature control buttons at the

same time.

Pump will not run

• Unplug the Ion, wait ten seconds, and plug the device back in.

Pump runs but will not fill bag

• Confirm that the basket and the basket cover washer (the silicon washer that

fits into the lid/basket cover) are in place and seated correctly.

• Confirm bag valve system is firmly seated on the nozzle base.

• Confirm bag is not obstructing airflow into the valve.

Basket Cover Washer will not stay in place

• Clear area of any left over aromatic plant material

• Remove washer, press the outside edges of the mesh screen firmly into the

center groove on the inside of the white nozzle/straw making certain to let the

screen crease along the edge of the inside groove.

• Insert washer lip side facing the mesh screen, making certain the washer is

seated snug and flat.

• If the above does not work, take the washer and the screen out. Clear any

debris. Replace the washer first, then bend the screen into a dome shape and

fit it into the washer with the point of the dome facing away from the lid and

the sides pressed against the inside of the washer to hold it in.

1 2 ... 23 24 25 26 27 28 29 30 31

Keine Kommentare

Zephyr ION Spezifikationen Seite 28